Analysis of Determining Target Accuracy of Rocket Launchers on Xbee-Pro based Wheeled Robots to Realize the Development of Technology on the Military Field

  • Anggara Trisna Nugraha Politeknik Perkapalan Negeri Surabaya
  • Dadang Priyambodo Marine Electrical Engineering Shipbuilding Institute of Polytechnic Surabaya, Surabaya
DOI: https://doi.org/10.35882/jeeemi.v2i3.5
Keywords: Wheel Robot, Rocket launcher, Angle Position, Xbee-pro

Abstract

At this time the rocket launcher is still controlled by humans who utilize technology using a PC and a servo motor as a control device to determine the accuracy at the shooting angle, in designing this robot complete components are needed so that the robot can work automatically according to the input given, the rocket launcher robot controlled automatically by communication from the PC after which the command is forwarded to the microcontroller using a USB TTL cable and sent to the Xbee-pro sender circuit then transmitted and received by the Xbee-pro receiver then transmitted to the microcontroller and processed to the control system on the launcher a rocket in the form of a servo motor and a relay as a component in the firing of the rocket launcher. Based on the test results, the robot has been able to direct the rocket launcher at a predetermined angle and has been able to carry out firing actions on each rocket starting from manual rockets, double rockets, triple rockets and full rockets with a success rate of up to 80%.

Downloads

Download data is not yet available.
Published
2020-10-29
How to Cite
[1]
Anggara Trisna Nugraha and D. Priyambodo, “Analysis of Determining Target Accuracy of Rocket Launchers on Xbee-Pro based Wheeled Robots to Realize the Development of Technology on the Military Field”, j.electron.electromedical.eng.med.inform, vol. 2, no. 3, pp. 114-118, Oct. 2020.
Issue
Vol 2 No 3 (2020): October
Section
Electronics

Copyright (c) 2020 Anggara Trisna Nugraha, Dadang Priyambodo

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).