Phototherapy Radiometer with AS7262 Sensor

  • Ichwan Syahrul Bahtiar Department of Electromedical Engineering Poltekkes Kemenkes Surabaya
  • Andjar Pudji Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
  • I Dewa Gede Hari Wisana Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
DOI: https://doi.org/10.35882/jeeemi.v1i1.8
Keywords: Phototherapy Radiometer, Blue Light, AS7262 Sensor, Phototherapy, ATMega328, Micro SD Card

Abstract

The phototherapy is a device used in hyperbilirubinemia therapy by using blue light radiation with ranges between 425nm-475nm. The effectiveness of hyperbilirubinemia therapy depends on the amount of energy emitted by light which expressed in μW/cm2. The purpose of this study is to develop a low-cost and high accuracy Phototherapy radiometer. Measurement of blue light irradiance using the AS7262 sensor which can measure the irradiance of visible light with a wavelength of 450nm, 500nm, 550nm, 570nm, 600nm, 650nm with relative responsiveness of 1 time at each wavelength. SD card memory is used to save measurement data of irradiance so that it can be processed later. Based on the blue light irradiance data collected the smallest error value is 0,40% at a distance of 10cm while the biggest error value is 9,01%  at a distance of 30cm. After testing the entire system, the device can be used according to its function and purpose.

Downloads

Download data is not yet available.
Published
2019-07-22
How to Cite
[1]
Ichwan Syahrul Bahtiar, A. Pudji, and I. D. G. H. Wisana, “Phototherapy Radiometer with AS7262 Sensor ”, j.electron.electromedical.eng.med.inform, vol. 1, no. 1, pp. 39-45, Jul. 2019.
Issue
Vol 1 No 1 (2019): July
Section
Electronics

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).