Cable Car Speed Control Using Programmable Logic Control Based on Fuzzy Logic

  • Santi Triwijaya politeknik perkeretaapian indonesia
  • Arief Darmawan Department of Railway Electrical Technology Politeknik Perkeretaapian Indonesia, Madiun
  • Andri Pradipta Department of Railway Electrical Technology Politeknik Perkeretaapian Indonesia, Madiun
  • Dara Aulia Feriando Department of Railway Electrical Technology Politeknik Perkeretaapian Indonesia, Madiun
DOI: https://doi.org/10.35882/10.%2035882/jeeemi.v2i3.7
Keywords: Cable Car PLC Fuzzy Logic Control system Safety and Reliability

Abstract

A cable car is a hanging car that runs by cable. Cable car carrier controlled by DC motor. The cable car can be a solution to accommodate the mobilization of agricultural commodities in areas that are difficult to access while still paying attention to safety and reliability. In this research, the speed of a cable car would be automatically controlled with Programmable Logic Control (PLC). PLC functions as a cable car operation controller by considering 3 parameters, namely: wind speed, maximum load weight, and distance (meters). The speed of the cable car is controlled by the PLC using fuzzy logic. Cable car speed is based on parameters of wind speed, load weight and distance. From the results obtained, the PLC has worked well in regulating the speed of the cable car and if any parameter exceeds the PLC limit, it can turn off the cable car.

Downloads

Download data is not yet available.
Published
2020-10-29
How to Cite
[1]
S. Triwijaya, A. Darmawan, A. Pradipta, and D. A. Feriando, “Cable Car Speed Control Using Programmable Logic Control Based on Fuzzy Logic ”, j.electron.electromedical.eng.med.inform, vol. 2, no. 3, pp. 125-129, Oct. 2020.
Issue
Vol 2 No 3 (2020): October
Section
Articles

Copyright (c) 2020 Santi triwijaya, Arief Darmawan, Andri Pradipta, Dara Aulia Feriando

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).