Electrosurgery Unit Monopolar (Cutting and Coagulation)

  • Ridho Armi Nabawi Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
  • Dhany Alvianto Wibaksono Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
  • Tri Bowo Indrato Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
  • Triana Rahmawati Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
DOI: https://doi.org/10.35882/jeeemi.v1i1.7
Keywords: Electrosurgery Unit; Frequency; Body Tissue; Power

Abstract

Electrosurgery Unit is a medical device that utilizes high frequency and voltage used to cut and dry tissue during the surgical process. The purpose of making this tool is to damage certain body tissues by heating the tissue. Heat is obtained by concentrating high frequency electricity on certain body tissues using active and passive electrodes as a medium. The Electrosurgery Unit involves the use of the CMOS 4069 IC as a frequency generator. The output frequency is set at 300 KHz then forwarded to the pulse regulating circuit and controlled with ic atmega328 then forwarded to the inverter circuit which functions to increase the voltage and output in the form of power. The module is calibrated using ESU Analyzer. This module is equipped with LOW, MEDIUM, HIGH. After the measurements are made, the more load is given higher to the tool, the higher the power released by the tool in each power selection. Then the load relationship and the power released are directly proportional. This ESU was made so that during the surgical process the body's tissue does not experience a lot of blood loss. Besides being able to use it for surgery, it can also be used to close the tissue after surgery.

Downloads

Download data is not yet available.
Published
2019-07-22
How to Cite
[1]
Ridho Armi Nabawi, Dhany Alvianto Wibaksono, T. B. Indrato, and T. Rahmawati, “Electrosurgery Unit Monopolar (Cutting and Coagulation)”, j.electron.electromedical.eng.med.inform, vol. 1, no. 1, pp. 33-38, Jul. 2019.
Issue
Vol 1 No 1 (2019): July
Section
Electronics

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).