Patient Monitor for SpO2 and Temperature Parameters

  • Moch Sahrul Triandi Putra Sahrul Departement of electromedical engineering poltekkes kemenkes surabaya
  • Triwiyanto
  • Torib Hamzah
DOI: https://doi.org/10.35882/jeeemi.v1i2.2
Keywords: patient monitor, finger sensor, LM35 sensor, SpO2, temperature

Abstract

Patient monitor is an apparatus used to monitor the patient's condition in real-time, hence the patient's physiological conditions can be identified at that time. The purpose of this study is to design a patient monitor for SpO2 and temperature parameters based on computer with Delphi progaming. In this work, the author developed  patient monitor with two parameters (SpO2 and Temperature). The workings of this tool are very simple by installing the finger sensor on the finger and the temperature sensor in the armpit area will then be detected by the two sensors that will be displayed on the PC and LCD Characters, analog data from the ADC Atmega is received by the personal computer (PC) via Bluetooth HC -05 and values ​​per parameter are also displayed on the Character LCD. After measuring, get an error in the tool, the biggest SpO2 error of this tool is 1.02% and get the smallest error of 0.8%. And for the biggest error of Temperature of 1.02% and the smallest error of 0.8%.

Downloads

Download data is not yet available.
Published
2019-10-01
How to Cite
[1]
M. S. T. P. Sahrul, Triwiyanto, and Torib Hamzah, “Patient Monitor for SpO2 and Temperature Parameters”, j.electron.electromedical.eng.med.inform, vol. 1, no. 2, pp. 7-12, Oct. 2019.
Issue
Vol 1 No 2 (2019): October
Section
Electronics

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).